STUDY OF QUALITY CONTROL ON TUNA LOIN CENTER CUT FROZEN PRODUCTION USING THE SIX SIGMA METHOD IN “X†TUNA FREEZING COMPANY
DOI :
https://doi.org/10.15578/aj.v5i1.11531Mots-clés :
Defect, DMAIC, FMEA, Six Sigma, RPNRésumé
Fishing companies must achieve the target by producing quality products, namely producing products according to predetermined standards, one of the efforts that can be done is to carry out quality control, many quality control methods can be applied, one of which is six sigma. The purpose of this study is to examine and apply quality control tools and provide alternative solutions or proposed improvements to reduce product defects inTuna Loin CutCenter Frozen. The method used in this study of quality control uses the Six Sigma method using the DMAIC method of analysis. The processing process of Tuna Loin CutCenter Frozenat the Tuna X Freezing Company. The results obtained are 6characteristics Critical to Quality with a DPMO value of 4,999,165 and the sigma value of 4.075887 in January 2020-February 2021. From the results of FMEA obtained 3 causes with the highest RPN value obtained from 3 defects, namely packaging vacuum leaking, uneven CO gas andengine program metalerrors. The suggested improvements are making a logbook to check the condition of the machine regularly, making a checklist to carry out tighter supervision of employees and calibrating the program by QC every time they do packing. After carrying out thestage control, the DPMO value added is 212.560 and Sigma is 5.023978. So it can be concluded that the application of themethod six sigma as a quality control control can reduce the DPMO value by 12.75%.
Références
Aliyah, N. S., Praharsi, Y., & Maulana, D. (2020). Analisa kinerja bongkar muat dengan lean six sigma untuk mengurangi demurrage di pelabuhan PT. Petrokimia Gresik. Jurnal Manajemen Maranatha, 19(2), 105–114. https://doi.org/10.28932/jmm.v19i2.1435
BPS. (2019). Statistik Perusahaan Perikanan. Badan Pusat Statistik.
Caesaron & Tandianto. (2020). Penerapan metode six sigma dengan pendekatan DMAIC pada proses handling painted body BMW x3 (studi kasus: PT. Tjahja sakti motor) Dino Caesaron, Tandianto. Jurnal PASTI, IX(3), 248–256.
Dewi, Widia,IW, & Aviantara, I. (2017). Pengaruh Sistem Manajemen Keamanan Pangan ISO 22000 : 2005 Terhadap Kinerja Perusahaan .The Effect of Food Safety Management System of ISO 22000 : 2005 on Company Performance. Jurnal BETA, 5(1), 93–102.
Ghiffari, I., Harsono, A., & Bakar, A. (2013). Analisis Six Sigma Untuk Mengurangi Jumlah Cacat Di Stasiun Kerja Sablon (Studi Kasus : CV . Miracle). Issn:2338-5081, 1 No 1(Institut Teknologi Nasional (Itenas) Bandung), 156–165.
Hadinoto, S., & Idrus, S. (2018). Proporsi dan Kadar Proksimat Bagian Tubuh Ikan Tuna Ekor Kuning (Thunnus albacares) Dari Perairan Maluku. Majalah BIAM, 14(2), 51. https://doi.org/10.29360/mb.v14i2.4212
Hartoyo,F.,Yudhistira,Y.,Chandra,A & Chie, H.H.(2012). Penerapan metode DMAIC dalam peningkatan acceptance rate untuk ukuran panjang produk bushing.Universitas Bina Nusantara
Mariah. (2011). Pengendalian mutu pada proses produksi Tuna loin ( Thunnus sp . ) dengan metode Six sigma studi kasus : PT X Mariah.
Safrizal. (2016). Pengendalian Kualitas dengan Metode Six Sigma Pengendalian Kualitas dengan Metode Six Sigma. Jurnal Manajemen Dan Keuangan, 5(2).
Zulkarnain, Wicakseno, T., & Silvia, D. (2021). Metode Six Sigma Dalam Perbaikan Cacat Botol pada Produk Personal Care Six Sigma Method in Repairing Bottle Defects in Personal Care Products. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 7(1), 19–26.
Téléchargements
Publiée
Numéro
Rubrique
Licence
The authors who publish this journal agree to the following terms:
a. The author retains the copyright and grants the journal the rights of the first publication with the work simultaneously licensed under  the Creative Commons Attribution-Share Alike 4.0 International License, which allows others to share the work with acknowledgment of the author's work and the original publication in this journal.
b. Authors may enter separate additional contractual arrangements for non-exclusive distribution of the published version of the journal (e.g., submit to an institutional repository or publish in a book), with acknowledgment of initial publication in this journal
c. Authors are allowed and encouraged to post their work online (e.g. in an institutional repository or on their website) before and during the submission process, as this may lead to productive exchanges, as well as citations of previously published and older works.
