ANALYSIS OF THE CARACTERISTICS OF PLASTIC OIL FOR FISHING TOOLS MADE FROM POLYETHELIENE (PE) AND POLYAMID (PA)
DOI :
https://doi.org/10.15578/aj.v7i1.15024Mots-clés :
Plastic Oil, Pyrolysis, fishing gear waste, PolyEthelien, PolyAmid.Résumé
The caracteristic of plastic oil include density, viscosity and heating value Plastic waste can be used as raw material for plastic oil by usingpyrolysis process. The resulting plastic oil can be used as an additive or mixturefuel in the engine. In this research, the process of making plastic oil was used twicepyrolysis process. The reactor temperatures in the first and second pyrolysis processes are different respectivelynamely 200 oC and 150 oC. From the results of this research it is known that in the first pyrolysis processwith a reactor temperature of 200 oC, from 25 kg of raw material produces 15.5 liters of plastic oil intime 8 hours. Meanwhile, in the second pyrolysis process with a reactor temperature of 150 oC, from 15 liters of oilThe plastic from the first pyrolysis process produces 11.6 liters of plastic oil in 3.33 minutesO'clock. The characteristics of the plastic oil produced are a density of 771.4 kg/m3, Viscosity0.501 m2/s and calorific value 10518 kJ/kg.
Références
Achilias, D.S. (2007). Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP). Journal of Hazardous Materials, 536–542.
Al-Salem, SM. (2017). Recycling and recovery routes of plastic solid waste (PSW): A review. Waste Management. 2625–2643.
Hasanudin, U. (2020). Proses pirolisis bertahap (two-stage pyrolysis) untuk peningkatan kualitas minyak pirolisis dari limbah plastik. Jurnal Teknologi Dan Industri Pangan, 45–52.
Jambeck, J.R. (2015). Plastic waste inputs from land into the ocean. Science, 768–771.
Kusumaningsih, T. (2020). Analisis Karakteristik Minyak Pirolisis dari Limbah Plastik Jenis Polietilena. Jurnal Teknik Kimia Indonesia, 85–91.
Putra, W.P. (2022). Efisiensi Energi pada Proses Pirolisis Dua Tahap untuk Produksi Minyak dari Limbah Plastik. Jurnal Rekayasa Energi, 34–42.
Sharuddin, S.D.A. (2016). A review on pyrolysis of plastic wastes. Energy Conversion and Management. 308–326.
Soerawidjaja, T.H. (2005). Bahan bakar hayati pengganti BBM: Prospek dan Tantangan Pengembangannya di Indonesia, Seminar Teknologi Untuk Negeri (STUN) 2005, PUSPIPTEK, Serpong.
Williams, P.T. (1999). luidised bed pyrolysis of low-density polyethylene to produce petrochemical feedstock. Journal of Analytical and Applied Pyrolysis, 107–126.
Téléchargements
Publiée
Numéro
Rubrique
Licence
The authors who publish this journal agree to the following terms:
a. The author retains the copyright and grants the journal the rights of the first publication with the work simultaneously licensed under  the Creative Commons Attribution-Share Alike 4.0 International License, which allows others to share the work with acknowledgment of the author's work and the original publication in this journal.
b. Authors may enter separate additional contractual arrangements for non-exclusive distribution of the published version of the journal (e.g., submit to an institutional repository or publish in a book), with acknowledgment of initial publication in this journal
c. Authors are allowed and encouraged to post their work online (e.g. in an institutional repository or on their website) before and during the submission process, as this may lead to productive exchanges, as well as citations of previously published and older works.
